What is a Class III Work Site

In the US, industrial safety regulators categorize classified work sites into various groupings: Class I, Class II or Class III. Out of the three classifications, Class I and Class II which involve the presence of flammable gases or vapors and dusts, are considered to be the most common.

Class III Work Site, governing combustible fibers and flyings, is rarely covered because such facilities are not as widespread. However, because Class III locations are equally as dangerous as Class I and Class II sites, it is important to understand the safety standards that govern this grouping.

Class III Work Site Hazards and Definitions

Examples of Class III hazardous locations include the following: textile mills, woodshops and cotton storage centers. Class III equipment, which includes heavy-duty lighting systems and portable tools, are equipped with more or less the same set of features that contain ignitions inside the unit. An exception to this practice is wiring installations for Class III, Division 2 locations.

In most cases, flammable fibers and flyings in Class III facilities are not floating around in the air. Instead, Class III particles tend to build up on immobile machines or permanent structures over time. The accumulation of fibers become extremely dangerous when exposed to an ignition source, such as a spark or intense heat.

Reducing the Accumulation of Heat

It is best practice to maintain adequate ventilation in Class III facilities.  This is because fibers or flyings can accumulate on machines, causing heat to become trapped inside the unit. Increasing the operating temperature of equipment can cause malfunction or in the worst-case scenario – result in a fatal explosion, when igniting an unstable, flammable compound.

Class III motors or generators are fully enclosed and have special temperature requirements for certain machines. Open units (without switching features) and squirrel-cage textile motors are examples of machines that can easily exceed Class III temperature standards.

Visit www.larsonelectonics.com for all hazardous lighting  solutions.

Solar vs Fuel Light Towers: Which One is Better for Construction Sites?

These days, businesses have numerous options at their disposal when comes to lighting systems for construction sites. One of the most popular options today includes light towers. These units can reach heights between eight to 85 feet for elevated illumination.

For remote construction sites without supporting connections to the grid, portable light masts are essential. The temporary lighting systems leverage an external power source, such as a battery-powered solar generator or a conventional, fuel-type generator. Both options offer power to the luminaries, but in the end, only one is truly suitable for your business.

Fuel-powered Light Towers

Light towers equipped with fuel generators are quickly becoming a staple in construction sites worldwide. The light masts are plugged directly into a generator located at the base of the mast. Some generators come with additional plugs and sockets to power equipment around the work site. Fuel-type generators don’t consume a lot of fuel, making them ideal for temporary lighting requirements. They can also be used for long-term projects; however, more fuel reserves are needed to keep the system going. This can be an issue for construction projects that are extremely remote, such as bridges and other infrastructure-type projects.

Another issue with relying on a fuel generator to power your lights on the construction site is noise. The units are loud and distracting, which can be difficult to work around. This forces operators to deploy the units in low activity areas of the location, such as perimeters or sections of the site that are unsuitable for work. From a maintenance perspective, fuel-type generators come with a lot of loose parts that are constantly moving. As a result, the units must be properly maintained to ensure reliability.

Solar (Battery-powered) Light Towers

Solar light masts utilize large panels, controllers and batteries to power luminaries and other equipment on the construction site. Like fuel-type generators, these units may also come with additional plugs and sockets for powering tools.

But unlike the above, solar light towers operate quietly – due to lack of moving parts. Solar components are solid state, which contributes to seamless operation. Because of this, operators can deploy the masts anywhere on the construction site without needing to take noise levels into consideration. Moreover, maintenance is greatly reduced, as the parts aren’t prone to wear and tear.

Some drawbacks of solar light towers include limitations of battery capacity and performance, as well as its reliance on sunlight. Without prolonged exposure to UV rays, the sustainable lighting system won’t be able function properly.

For full selection of light towers, please visit Larson Electronic, industrial lighting manufacturer from Texas.

Temporary LED Lights For Construction & Large-Scale Projects

Construction sites are some of the largest consumers of temporary LED lights. The sector relies on powerful luminaries during after-hour operations. During this period, urban activities are at their lowest, allowing workers to bring in machines and obstructive equipment, such as cranes and dump trucks, to the site with minimal interference.

Portable and Heavy-duty

Busy construction sites have very strict requirements surrounding the type of lighting products and systems for such projects. Most operators require temporary LED lights to have a high degree of portability. For example, at the early stage of construction, buildings are lacking walls and ceilings. Because of this, standard high bay lights that are mounted on ceilings or surfaces cannot be used. Instead, portable string lights with C-hooks may be deployed around the location. These units allow workers to mount individual luminaries on scaffolding’s, poles and other nearby structures.

They can also be carried by hand for detailed tasks. Construction string lights are daisy chained (connected) and utilize a single source of power (see more at: Larson Electronics). This reduces the need to setup and tear down individual lamps on the site.

For intense lighting requirements, businesses may deploy luminaries that are mounted on carts or stands. The units are ideal for such applications because workers can easily transport the lights around the site effortlessly. For LED lights on carts, it only takes one person to move the unit from one location to another.

LED Light Towers for Construction

Elevated LED lighting systems are extremely common in construction sites. This includes LED light towers that are capable of reaching heights between 8-70 feet, depending on the needs or scale of the project. Like temporary construction LED lights, these units are designed to mimic permanent luminaries that are mounted on poles.

LED light towers for construction are recommended for tasks that need bright illumination for long periods of time, such as welding, setting up foundations and etc. The luminaries may also be used to highlight checkpoints and high activity areas.

To withstand the rough environment, LED light towers are typically waterproof, weatherproof and capable of standing up to strong winds. Moreover, the light masts may also be supported by a generator, for remote construction sites that lack access to mainstream power sources, such as the city grid. A new trend in LED light towers is the use of solar energy, in place of fuel-powered generators. These cutting-edge units offer quiet operation and clean energy during operation. They can also be paired with a day/night photocell to reduce energy consumption during the day.

Options in Construction Site Lighting

Most construction workers are called to respond on duty under pressure and under the heat of the sun beating the slow running clock. For all build sites having long hours of work, proper LED construction light is needed to ensure that the workers are safe and will stay on work at a given schedule round-the-clock.

Work Site Lighting. It has a wide range array of its lighting and has portable power giving units which will suit perfectly to any construction environment. They will provide an explosion proof lighting, LED area lighting, and even a specialized lighting like exclusive crane mount lights that will provide enough light through an overhead projection to the whole site, almost to eliminate shadows completely.

The portable power supply is also crucial on the construction sites that will produce dozens of power equipment operating simultaneously. The Work Site Lighting products and the customs create a power supply units, whether it is a small GFCI and or a large box which will serves on the heart of a working site.

As always, the Work Site Lighting were glad to give an expert advice and the best training to any of their products and they are much willing to customize in building an explosion proof lights and also for portable power supply to fit in your needs.

Below are some construction lights for you to choose from on your construction site:

  1. An Offshore to LED Lighting Tower. Wherever you work, safety should be the number one concern and priority. However, when you work on a certain location to where hazard are present such as offshore platform, space is very limited, or you are working on a barge and or in an oil field. You equipment must necessary to be delivered at its maximum effectiveness without wasted space in the area. That is what the Work Site Lighting’s Dangerous Location on LED construction light Tower can do better compared to any other kind of light tower in the market as of today. learn additional tips at http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspxlights
  2. 8W LED Hand Lamp. This is the World’s most famous explosion-proof lighting. You have seen upon this rugged and are reliable hand lamp to all workplaces all over the globe, but these updated LED invention of this kind of hand lamp encompasses the classic light called Daniel Woodhead lights virtually each day. The LED bulb will reduce the wattage on the conventional version from a 75w down to 8w. LEDs are resistant to shock and vibration, the feature are much longer in its life span compared to an incandescent bulbs, and will provide a clean, true color illumination. This is light were highly portable, easy to use, safe to install, dependable light to where you need it the most.
  3. 75W Explosion on Proof Extension Hand Lamp. For good reason, the 75w extension is more popular on all explosion-proof lightings in the world. This lighting is the font line for highly portable, simple to use, rugged, and it delivers for safe use, and is highly-dependable lighting. read more reviews on this link.
  4. Crane Mount Lighting. This is only available for the Work Site Lighting. This refers to the safety-enhancing invention created from the common sense opinion: to eliminate the shadow from above.